1/8/2024 0 Comments Polycom otx 300Leaving a Meeting Using Polycom Conferencing for OutlookĬalling with the Classic UI. Joining a Meeting Using Polycom Conferencing for Outlook Making and Hanging Up a Point-to-Point Plus Call. Making and Hanging Up Calls Using Meeting Composer. Understanding the Touch Panel Indicators. 2-1Ībout the Enhanced and Classic User Interfaces. Information in this document is subject to change without notice.ġ Introducing the OTX 300. Polycom, Inc., is not responsible for printing or clerical errors. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).Įvery effort has been made to ensure that the information in this manual is accurate. The software is protected by United States copyright laws and international treaty provision. Under the law, reproducing includes translating into another language or format.Īs between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software contained within its products. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. and foreign patents and/or pending patent applications held by Polycom, Inc. The accompanying product is protected by one or more U.S. and are registered and/or common-law marks in the United States and various other countries.Īll other trademarks are property of their respective owners. POLYCOM®, the Polycom "Triangles" logo and the names and marks associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. Leaving a Meeting Using Polycom Conferencing for Outlook.Joining a Meeting Using Polycom Conferencing for Outlook.Making and Hanging Up Calls Using Meeting Composer.Understanding the Touch Panel Indicators.About the Enhanced and Classic User Interfaces.Problems can arise when your hardware device is too old or not supported any longer. This will help if you installed an incorrect or mismatched driver. Try to set a system restore point before installing a device driver. Key Features: Vibrant HD quality for up to 50 less bandwidth with H. It is highly recommended to always use the most recent driver version available. Web Interface: When Diagnostics > System Log > System Log Settings > Remote Logging Enabled was set and you restarted your HDX system, it might have stopped storing logs. User Interface: When placing multipoint calls using the Recent Call list in the web interface with the option Auto Answer Multipoint Video enabled, multiple pop-up messages might have displayed asking if you wanted to accept the call. When this occurred, the Focus_Position register did not always return the value written. User Interface: During OTX 300 system calls running the Telepresence Tool, the Camera Focus settings were not retained. Software Update: After performing a USB software update and a system reset, and loading the system profile, your HDX system might have sent multiple registration requests within one second, causing the DMA to quarantine the HDX system. Software Update: After a software update was performed and the HDX system was powered off, the HDX system might have turned on automatically in 5 to 6 days if a ping was continuously sent to the system. Documentation: In the Integrator’s Reference Manual for the calendarpassword command, the Comments section had the following incorrect statement: The password can be up to 15 characters long. Powering the system off and on might not have resolved the issue. The camera might have remained in the power off position, although the power was on. Cameras: You might have experienced no video or black video when using EagleEye III as your main camera. If you had configured the camera as a Content source, video from the camera might have displayed for several seconds on the initial attempt, then the following message might have appeared: “Please check your content cable and make sure that it is sending video in a supported resolution such as 1024x768 60 Hz.” This problem has been corrected. Cameras: HDX systems did not support EagleEye III as a Content source on camera (HDCI) port 2. On your next attempts to select Camera 3, the local interface showed that Camera 3 was selected, but the video displayed Camera 1 or Camera 2. Cameras: On an HDX 9006 system, the first time you selected Camera 3, the system correctly switched to EagleEye III camera video. Calling: While in an H323 call, the localized name was not displayed at the far-end site.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |